It is highly important you install ground anchors on mobile buildings
The storms are getting worse year after year, 2017 was one of the worst year’s for storms in history.
Luckily for our customer in the images her building was still in one piece despite its flying lesson, over the fence and into the menage.
Our Ground anchors are easy to install and remove should you wish to move the building.
They are fitted by first bolting or screwing the bracket to the building and mobile skids, then the anchor is hammered through the slot in the bracket. The slot prevents the anchor rotating out. (We will do this for you on installations )
In some areas, planning permission is needed for permanent fixed structures, for example, stables and shelters, however, using our anchors, the shelter can be safe and still be considered to be temporary and therefore outside the planning requirements.
How to install our Ground anchors on mobile buildings
Firstly the T505 bracket is fixed to the shelter using bolts or large screws, then when the shelter is in position, the anchors are hammered through the slot in the brackets, the anchor will rotate when hammered, cutting a thread in the ground. The slot in the bracket prevents any unwanted rotation. If the shelter needs re-positioning, the anchors are simply unwound, the shelter moved to the new location, then the anchors are again hammered through the slot in the brackets. They can be re-used many, many times.
How to install your ground anchors
1. Fix the T505 bracket using bolts or coach screws
2. Hammer the anchor through the slot in the bracket
The shelter is now secured
The ground anchors are easily removed using a large spanner
Our ground anchors for mobile field shelters can be ordered with your field shelter and we will fit or delivered via courier.