Field Shelter Ground Anchors also for use on mobile stables

We highly recommend you anchor your mobile field shelters and stables down

Our field shelter ground anchors are easy to install and remove should you wish to move the building.

They are fitted by first bolting or screwing the bracket to the building and mobile skids, then the anchor is hammered through the slot in the bracket. The slot prevents the anchor rotating out. (We will do this for you on installations )

In some areas, planning permission is needed for permanent fixed structures, for example, stables and shelters, however, using our field shelter ground anchors the shelter can be safe and still be considered to be temporary and therefore outside the planning requirements.

Low Profile Safety Ground Anchors

Securing shelters with Low Profile safety anchors.

Firstly the T505 bracket is fixed to the shelter using bolts or large screws, then when the shelter is in position, the anchors are hammered through the slot in the brackets, the anchor will rotate when hammered, cutting a thread in the ground. The slot in the bracket prevents any unwanted rotation. If the shelter needs re positioning, the anchors are simply unwound, the shelter moved to the new location, then the anchors are again hammered through the slot in the brackets. They can be re-used many, many times.

Price includes

8x Bracket

120mm x 100mm
Material: Steel 100mm wide, 5mm thick
Holes: 10mm

8 x 50 x 770 Low Profile Safety Ground Anchor

Diameter:                    50mm
Approximate length:   770mm
Min anchor strength:   4000kg

We recommend 4 Anchors one on each corner of your building

Ground anchors on mobile buildings  

Installation Video